home *** CD-ROM | disk | FTP | other *** search
-
-
-
- - 1 -
-
-
-
- 4. _S_u_p_p_o_r_t_i_n_g__M_u_l_t_i_p_l_e__V_e_r_s_i_o_n_s
-
- To run SoftWindows 1.x and SoftWindows 2.0 on the same
- machine, perform the following steps:
-
- Install SoftWindows 2.0
-
- If you have a permanent 1.x license installed, SoftWindows
- 2.0 will upgrade it. A copy of the old license is stored in
- /_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s_2/_F_L_E_X_l_m/_1_2_5_l_i_c_e_n_s_e._d_a_t.
-
- Run inst or Software Manager. If you run Software Manager,
- make sure the Command item in the Panes menu is checked.
-
- In inst or the Command line of Software Manager, type "set
- rulesoverride true".
-
- Then proceed with the installation of SoftWindows 1.x.
-
- If you had a permanent license, copy the license from:
-
- /_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s_2/_F_L_E_X_l_m/_1_2_5_l_i_c_e_n_s_e._d_a_t
- to:
- /_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s/_F_L_E_X_l_m/_l_i_c_e_n_s_e._d_a_t
-
- If you install SoftWindows 1.x after installing SoftWindows
- 2.0, you will notice that items in the help menu in
- SoftWindows 2.0 no longer work correctly. This is because
- the helpmap file was overwritten by the SoftWindows 1.x
- helpmap file. You can only have one version's helpmap file
- active at a time. If you prefer to switch back to
- SoftWindows 2.0 help, copy:
-
- /_u_s_r/_l_i_b/_S_o_f_t_W_i_n_d_o_w_s_2/_s_O_f_t_W_i_n_d_o_w_s._h_e_l_p_m_a_p
- to:
- /_u_s_r/_s_h_a_r_e/_h_e_l_p/_s_O_f_t_W_i_n_d_o_w_s._h_e_l_p_m_a_p
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-